Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate.
Output up to 800 hp: Pistons and connecting rods for 2.0L TSI engines with timing chain
With this set you have the perfect combination of forged pistons and conrods for your 2.0L TSI engine: The high performance pistons come from JE Pistons, the robust H-Beam steel conrods come from BAR-TEK® and with them are racing piston bearings from ACL! These components not only harmonize perfectly with each other, but you also save money with the set compared to the single purchase.
The JE Pistons pistons are extra reinforced for extreme performance and at the same time quite light. This station wagon is of course perfect for motorsports. With the pistons comes everything you need for installation: bolts, rings and clips.
Our H-Beam connecting rods are also extremely light and at the same time very stable. Due to their design they withstand the high pressure loads without any problems. They are milled from the solid and have an additional bore (rifle drilled) for better piston pin lubrication. They also come with everything you need for assembly: the matching ARP expansion screws and assembly paste.
Features of the high-performance pistons:
Extremely light due to special alloy
Reinforced for maximum performance
Also for standard bore 82.50 mm
21 mm Piston pin
For 2.0L TSI with motor type EA888
Complete set incl. piston pins, rings and clips
Installation and drilling dimensions enclosed
Features of the H-Beam Conrods:
Original BAR-TEK®
high strength milled from solid material
suitable for extreme performance increases up to approx. 1000 hp
extremely light and very stable
Magnaflux inspected
4 pieces per set
Dimensions. 144 x 21 mm
With ARP 2000 expansion bolts 3/8"
ARP Assembly paste
Weight per connecting rod with bolts only 599 grams
With additional bore for piston pin lubrication (riffe drilled)
precisely angled and tested at our premises
Features of the ACL connecting rod bearings:
Racing bearing
Coated
Extra bore for piston pin
Suitable for:
2.0L TSI EA888 engines with chain as used in Golf Mk6, Audi TT, Audi A3 and other 2.0L TSI engines.
From 2 bar boost pressure, our more powerful turbo piston pin MUST be used
The specified compression is in conjunction with a 0.79 mm cylinder head gasket
normal: Standard forged pistons from JE-Kolben. Completely round piston shirt.
Q - Asymmetrical: The asymmetrical piston design by JE Pistons. Has a wide piston shirt on the main pressure side and a narrow, friction-reducing one on the secondary pressure side. As a result of this design, the pistons must be marked with a Q, our special oil spray nozzles for piston crown cooling must be installed. You can find these below under Accessories!
FSR pistons: The asymmetrical FSR piston line (Forged Side Relief) by JE Pistons includes a modern forged design with a wider piston shirt on the main pressure side and a smaller, friction-reducing shirt on the side pressure side. In combination with precise CNC machining, a high-strength, lightweight piston is created that is extremely durable.
Ultra series: The pistons of the Ultra series combine all premium functions from JE and the brand new technology of the forging industry! The revolutionary Perfect Skirt coating from JE is one of the many technologically advanced aspects of the Ultra series. It protects the piston shafts, reduces friction and prevents cold start piston shocks and incorrect knocking. All pistons in the Ultra series are supplied with a ceramic crown coating as standard to ensure a longer service life and better exhaust gas cleaning properties. Thicker piston pins made of premium material are another feature of the Ultra series. In combination with the special grain flow-optimized forging technology, the Ultra series is ready for enormous performance.
Output up to 800 hp: Pistons and connecting rods for 2.0L TSI engines with timing chain
With this set you have the perfect combination of forged pistons and conrods for your 2.0L TSI engine: The high performance pistons come from JE Pistons, the robust H-Beam steel conrods come from BAR-TEK® and with them are racing piston bearings from ACL! These components not only harmonize perfectly with each other, but you also save money with the set compared to the single purchase.
The JE Pistons pistons are extra reinforced for extreme performance and at the same time quite light. This station wagon is of course perfect for motorsports. With the pistons comes everything you need for installation: bolts, rings and clips.
Our H-Beam connecting rods are also extremely light and at the same time very stable. Due to their design they withstand the high pressure loads without any problems. They are milled from the solid and have an additional bore (rifle drilled) for better piston pin lubrication. They also come with everything you need for assembly: the matching ARP expansion screws and assembly paste.
Features of the high-performance pistons:
Extremely light due to special alloy
Reinforced for maximum performance
Also for standard bore 82.50 mm
21 mm Piston pin
For 2.0L TSI with motor type EA888
Complete set incl. piston pins, rings and clips
Installation and drilling dimensions enclosed
Features of the H-Beam Conrods:
Original BAR-TEK®
high strength milled from solid material
suitable for extreme performance increases up to approx. 1000 hp
extremely light and very stable
Magnaflux inspected
4 pieces per set
Dimensions. 144 x 21 mm
With ARP 2000 expansion bolts 3/8"
ARP Assembly paste
Weight per connecting rod with bolts only 599 grams
With additional bore for piston pin lubrication (riffe drilled)
precisely angled and tested at our premises
Features of the ACL connecting rod bearings:
Racing bearing
Coated
Extra bore for piston pin
Suitable for:
2.0L TSI EA888 engines with chain as used in Golf Mk6, Audi TT, Audi A3 and other 2.0L TSI engines.
From 2 bar boost pressure, our more powerful turbo piston pin MUST be used
The specified compression is in conjunction with a 0.79 mm cylinder head gasket
normal: Standard forged pistons from JE-Kolben. Completely round piston shirt.
Q - Asymmetrical: The asymmetrical piston design by JE Pistons. Has a wide piston shirt on the main pressure side and a narrow, friction-reducing one on the secondary pressure side. As a result of this design, the pistons must be marked with a Q, our special oil spray nozzles for piston crown cooling must be installed. You can find these below under Accessories!
FSR pistons: The asymmetrical FSR piston line (Forged Side Relief) by JE Pistons includes a modern forged design with a wider piston shirt on the main pressure side and a smaller, friction-reducing shirt on the side pressure side. In combination with precise CNC machining, a high-strength, lightweight piston is created that is extremely durable.
Ultra series: The pistons of the Ultra series combine all premium functions from JE and the brand new technology of the forging industry! The revolutionary Perfect Skirt coating from JE is one of the many technologically advanced aspects of the Ultra series. It protects the piston shafts, reduces friction and prevents cold start piston shocks and incorrect knocking. All pistons in the Ultra series are supplied with a ceramic crown coating as standard to ensure a longer service life and better exhaust gas cleaning properties. Thicker piston pins made of premium material are another feature of the Ultra series. In combination with the special grain flow-optimized forging technology, the Ultra series is ready for enormous performance.
