Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate.
1.8T 20V Set consisting of Wiseco pistons and BAR-TEK® connecting rods
Our 1.8T 20V set is a team of perfectly matched components: High-quality forged pistons from Wiseco and our X-Beam steel conrods from BAR-TEK®. You save money on the single purchase of the parts, but the special thing about this set is the enormous power it offers: you can drive up to 650 hp without any problems!
The Wiseco forged pistons are made for extreme performance and therefore complement our connecting rods perfectly. They are extremely light and reinforced, which is why they can withstand enormous loads. The piston skirt is also optionally coated to reduce friction. With a 1.65 mm cylinder head gasket you achieve a compression ratio of 8.5:1. Included are piston pins, rings and clips. If you still need more displacement and power, you've come to the right place with our Stroker Kit for 2.0L displacement.
Our X-Beam steel connecting rods have also been developed for sporty ambitious drivers with Golf Mk4, Audi A3, S3, TT and Co. Their design ensures that the extreme forces acting on them are optimally distributed and thus reduced. This makes our connecting rods extremely stable, while at only 599 grams they are very light. The connecting rods alone can easily withstand up to 1000 hp! Also included are the high-quality ARP 2000 expansion bolts in 3/8" and the ARP assembly paste.
Features piston:
Original Wiseco with coating
Extremely light due to special alloy
Reinforced for maximum performance
Drilling in 81,00 mm, 81,50 mm and 82,00 mm
20mm piston pin
Compaction 8.5:1
Piston shirt optionally coated for less friction
Complete set incl. piston pins, rings and clips
Installation and drilling dimensions enclosed
Features X-Beam conrods:
Original BAR-TEK®
high strength milled from solid material
suitable for extreme performance increases up to approx. 1000 hp
extremely light and very stable
Magnaflux inspected
4 pieces per set
With ARP 2000 expansion screws 3/8"
ARP Assembly paste
Weight per connecting rod with bolts only 599 g
With additional bore for piston pin lubrication
Features ACL connecting rod bearing:
Racing bearing
Coated
Extra bore for piston pin
Suitable for:
1.8T 20V engines as installed in Golf 4, Audi TT, Seat Leon and other 1.8T 20V engines.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
1.8T 20V Set consisting of Wiseco pistons and BAR-TEK® connecting rods
Our 1.8T 20V set is a team of perfectly matched components: High-quality forged pistons from Wiseco and our X-Beam steel conrods from BAR-TEK®. You save money on the single purchase of the parts, but the special thing about this set is the enormous power it offers: you can drive up to 650 hp without any problems!
The Wiseco forged pistons are made for extreme performance and therefore complement our connecting rods perfectly. They are extremely light and reinforced, which is why they can withstand enormous loads. The piston skirt is also optionally coated to reduce friction. With a 1.65 mm cylinder head gasket you achieve a compression ratio of 8.5:1. Included are piston pins, rings and clips. If you still need more displacement and power, you've come to the right place with our Stroker Kit for 2.0L displacement.
Our X-Beam steel connecting rods have also been developed for sporty ambitious drivers with Golf Mk4, Audi A3, S3, TT and Co. Their design ensures that the extreme forces acting on them are optimally distributed and thus reduced. This makes our connecting rods extremely stable, while at only 599 grams they are very light. The connecting rods alone can easily withstand up to 1000 hp! Also included are the high-quality ARP 2000 expansion bolts in 3/8" and the ARP assembly paste.
Features piston:
Original Wiseco with coating
Extremely light due to special alloy
Reinforced for maximum performance
Drilling in 81,00 mm, 81,50 mm and 82,00 mm
20mm piston pin
Compaction 8.5:1
Piston shirt optionally coated for less friction
Complete set incl. piston pins, rings and clips
Installation and drilling dimensions enclosed
Features X-Beam conrods:
Original BAR-TEK®
high strength milled from solid material
suitable for extreme performance increases up to approx. 1000 hp
extremely light and very stable
Magnaflux inspected
4 pieces per set
With ARP 2000 expansion screws 3/8"
ARP Assembly paste
Weight per connecting rod with bolts only 599 g
With additional bore for piston pin lubrication
Features ACL connecting rod bearing:
Racing bearing
Coated
Extra bore for piston pin
Suitable for:
1.8T 20V engines as installed in Golf 4, Audi TT, Seat Leon and other 1.8T 20V engines.
Here is our video on the correct installation of connecting rods and connecting rod bolts:
