1400°C TITANIUM Exhaust Wrap

Titanium heat protection tape universally applicable for exhaust manifolds or fan manifolds.

- New development from lava stone
- Up to 1150°C continuous load (for a short time also up to 1400°C)
- Particularly flexible and easy to install
- No spray adhesive necessary
- Especially recommended for turbo engines

Not only reduces heat radiation in the engine compartment but also increases engine performance by reducing heat loss.

The heat tape is simply wrapped around the exhaust pipes and fastened with wire rods or special stainless steel ties.

Two different widths and various lengths are available.

Tip:
The required length of the titanium heat protection tape simply determine with the help of a cable, which you wrap around the manifold.
As a rough guide, you can take about 23 meters of the 25mm wide tape for a manifold of a 4 cylinder engine.

Installation Tip:
For easy mounting of the heat protection tape, we recommend the special stainless steel fastening tapes (stainless steel cable ties) or stainless steel safety wire.