VR6 TURBO 470ccm injector kit BOSCH 100% matched

6 Bosch injectors 470 cc flow at 3 bar.

When using a upgrade supercharger, these nozzles are essential. Thus no change of the fuel pressure necessary! Chip has to be adjusted of course. It is also recommended to install an additional fuel pump such as our Pierburg pump.

Technical data:

• 470 cc/min at 3 bar
• 14 ohm (high impedance)
• 4 jet with EV6 design
• Length from O-ring to O-ring start 60 mm
• Made in Germany! 

Suitable for many models like VR6, G60, 16v or 1.8T Audi S2 or RS2

In the kit are 6 pieces included. Nozzles are also available individually. PLUS: Nozzles are tested in advance and paired with each other! So you get perfectly tuned injectors for your engine!

Even new injectors have a certain spread of the injection amount!
The manufacturers indicate a tolerance of up to 8 % as "normal". But in the worst case this can lead to incorrect injection amounts per cylinder. As a result, the cylinders get different amounts of fuel injected and the engine does not run cleanly or damage can occur to piston or valves! Thanks to our ASNU nozzle test bench, we can also test new injection nozzles and thus pair them optimally with each other. Click here to go directly to our nozzle test bench.

relaunch.detail.detail-tabs.manufacturer.title

relaunch.detail.detail-tabs.manufacturer.subtitle

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3

info@bar-tek.com