4.0L TFSI Audi S6 RS6 S7 RS7 S8 Racing Valve Springs Kit BAR-TEK®

Original BAR-TEK: Sport valve spring set for 4.0L TFSI engines like Audi S6 & RS6

Racing feeling for tuning fans: Our original BAR-TEK sport valve spring set made of high quality tempered steel with titanium spring plates. Suitable for all 4.0L TFSI engines as installed in the Audi S6, RS6, S7, RS7 and S8.

These valve springs have an extra matched spring rate and provide faster and better response from your 4.0L TFSI engine. The titanium spring retainers allow for a lighter valve train, plus more boost pressure and higher RPMs are no longer a problem. The stability is perfect for very high revs and is correspondingly fun to drive with your RS6.

More boost pressure or sport camshafts: Now you need our 4.0L sport valve springs

Our sport valve springs are necessary as soon as more boost pressure is used or when other camshafts are installed. Unfortunately, the original springs often break or the valves do not close properly. Both problems lead to a capital engine damage!

Features:

• Better and faster response
• Higher engine speed possible
• Lighter valve train due to titanium discs
• Absolutely stable for high revs
• More boost pressure possible
• With Stage 1 70HP & 70NM more

Included in the kit:

• 32 valve springs made of high quality tempered steel
• 32 valve spring retainers made of high quality titanium

We recommend this valve spring kit for 4.0L TFSI engines with modified camshafts and/or for upgrade turbochargers with more boost pressure.

Picture similar. Picture shows 4 cylinder spring kit

Please note: Our sports valve springs are designed for high performance. They are made from a special heat-treated steel that has a high level of strength and toughness. They are specially coated and have a higher material thickness than standard springs. This makes them ideal for sporting use. 

Not only the material itself, but also the design of our valve springs is something special. Thanks to their oval shape, a larger valve lift is created. Among other things, this increases the speed stability of your engine. The conical design (the spring is narrower at the top) reduces the mass and also has a positive effect on the overall engine running. 

With the oval shape, we have also eliminated a problem that can go hand in hand with increased power and springs that are too weak. This is because turbocharged engines can have problems with boost pressure if the valves or the plates and springs are too weak. Bartek explains what this feels like in the video below on the valve springs. 

With the optimum shape, we therefore ensure that the springs cannot go on block (and break) and that the correct preload is always applied to the springs. As a result, the engine revs up more smoothly and there are no more problems with the boost pressure.

relaunch.detail.detail-tabs.manufacturer.title

relaunch.detail.detail-tabs.manufacturer.subtitle

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3

info@bar-tek.com