1.4L TSI EA111 & EA211 H-Beam Steel Con-Rods ZRP

Sturdy steel H-Beam connecting rods for 1.4L TSI engines

H-beam steel connecting rods for all 1.4L TSI engines EA111 and EA211 are designed for an extreme performance increase up to 600 PS (441 kW). This will increase the performance of your Golf Mk7, Audi A1 and Co enormously. From a performance of 200 hp you should upgrade to these connecting rods, as the original parts cannot withstand and tear this high load.

Thanks to the H-beam these connecting rods are extremely robust and have a very high torsion resistance. The loads are reduced and distributed to the connecting rod, which is why they are also very crack-resistant. Although they are full of stability, our 1.4L TSI connecting rods are extremely light: every gram counts when it comes to increasing performance.

In order to optimally lubricate the piston pins and protect the engine parts from abrasion, the connecting rods come with an additional drilling (rifle drilled). All ZRP connecting rods are precisely angled and tested. Included are of course 5/16" ARP 2000 expansion bolts and the assembly paste. There are a few things to keep in mind during assembly, so we've summarized some information on how to tighten the connecting rod bolts correctly for you!

Features of H-Beam connecting rods:

• milled from solid material and therefore very robust
• suitable for extreme performance increases up to approx. 600 PS (441 kW)
  
• extremely light and very stable
• Magnaflux inspected
• 4 pieces per set
• Dimensions 144 x 19 mm
• With ARP 2000 expansion bolts 5/16"
• ARP Assembly paste
• With additional bore for piston pin lubrication (rifle drilled)