2.0L TSI EA888 Gen.2 Cylinder Head High Boost ULTI Kit BAR-TEK®

We have redefined "High Boost" once again: This set is for all who want to bring their engine to the next tuning level ! Here is everything that makes your HP-heart beat faster, because with it your TSI keeps even at over 600 HP and high speeds!

Ultimate kit for your 2.0L TSI EA888 1st and 2nd generation.

We wanted to put together an ULTIMATE kit that surpasses anything you already know, and that's where this kit came from: a set of perfectly matched parts that get everything out of your cylinder head. Valve springs, valves, stem seals, guides, hydros and cam followers - you've got everything you need for your new cylinder head.

Also on the team are our BAR-TEK® valve springs with titanium plates. Matching these are the Super Alloy intake and exhaust valves from BAR-TEK®. All other parts in the kit are also of the highest quality and work together like Swiss clockwork: our Viton stem seals along with our valve guides, matching hydros and cam followers. A known weak point with the TSI engine as these tend to break.

The best thing about the ULTIMATE kit is that you save money at the same time (compared to buying them individually) and all components work so well together!

High Boost for your TSI.

We have gone all out with this kit and put together a set that brings you together with the block, steadfast even up to 1000 HP home. With these optimally harmonized components you bring your Golf 6 and all other 2.0L TSI engines carefree to the next level!

For the extreme performance we wanted to have only the best components, so you get here the BAR-TEK® valves including our reinforced valve springs. The titanium plates are extremely light and strong, making them ideal for racing.

So you don't have to worry anymore, the kit is completed with the best components available: Valve guides, Viton stem seals, hydros and cam followers made in Germany. Youcan't ask for more!

Features Valve Springs:

• Faster response
• Higher engine speed possible
• Optimal when using upgrade camshafts
• Lighter valve train due to titaniumspring retainer
• Stable for boost pressures far above 2bar (tested up to 3bar)
• 8 springs exhaust
• 8 springs intake
• Spring retainer made of titanium on top

Features of BAR-TEK® valves:

• High temperature resistance
• Strong tensile strength
• Special heat treated material
• High strength material
• Quality and workmanship at the highest level
• Exhaust Nimonic
• Intake Martensite 
• 3-groove wedges for perfect hold

Features hydro tappet

• Made in Germany
• OEM quality

Features cam followers:

• Made in Germany
• OEM Quality
• Hydro tappets and cam followers should always be replaced when installing a sports camshaft or when replacing the original camshafts.

Features of the valve stem seals

• High temperature resistance
• Improved sliding properties
• Longer service life
• For 6mm valves

Features of valve guides

• High temperature resistance
• Improved thermal conductivity
• Longer valve and valve seat life
• Better cylinder filling due to conical shape

Suitable for all 2.0L TSI EA888 engines of the 1st and 2nd generation such as installed in Golf 6, Audi TT, Audi A3, Leon and many more.

Manufacturer

Info about manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3

info@bar-tek.com